|
CUTTER STORTI - CUTTING MACHINE STORTI
A. 4500mm LONG LOAD ROLLER located at: LEFT, complete with motorized rollers and lateral support teams, with motorized motor KW.0, 55 + electronic inverter.
B. NEW CENTRAL GROUP OF CUT complete with:
- Engine cut 9.2 Kw. inverter-driven;
- Kw motor. 0.37 complete electronic inverter for the automatic adjustment of the climb speed in function of the
type of material and of sharpening of the cutting chain +
potentiometer to set to manual;
No. 1/LAMA Portacatena TYPE CMSPMI120-1/LATO
WORK;
No. 1/CATENA cutting type: CMS20/3mm/100/MAGLIE;
Hydraulic unit for lubrication of the chain
cutting, with a capacity of 35/litri, provided WITHOUT OIL.
CUTTING SYSTEM PROVIDED ON DELIVERY
FROM THE BOTTOM UP with the possibility of reversing
FROM 'TOP TO BOTTOM half a selector with
manual intervention to turn the body bar and chain cutting.
PVC shelters in the area cut that down in the manual.
C-Switchboard managed by OMRON PLC and control panel
With BUTTONS WITH AUTOMATIC to MANUAL
European standards;
ROLLER EXHAUST LONG 4500mm located at: RIGHT, and divided into two parts, of which:
The first part of D-motorized 2000mm long, complete with rollers
motorized and lateral support teams, powered by
gearmotor KW.0, 55 + electronic inverter.
And the second-NEUTRAL 2500mm long with 60mm diameter rollers and without teams;
GROUP F-NR. 2 PRESSURE FERMAPACCO with working stroke 1000mm with automatic and independent from the control panel.
G-BARRIER FOR MEASURING LENGTH CUTTING MACHINE LOCATED ON THE REAR ROLLER with electronic positioning complete with: HP motor. 0.37 + electronic inverter OMRON AB004, electronic instrumentation, encoders, photoelectric cells ETCC.
H-NR. 1/NASTRO PVC HORIZONTAL SMOOTH, for the recovery of waste cut, LONG: 6000mm WIDE 600mm, with output under the roller of: exhaust, complete with gear motor;
No. I-1/NASTRO PVC MARKS WITH INCLINED, LONG: 3000mm WIDE 600mm, complete with motor, with 90 degrees;
the machine is located in Italy
|
